Design for circularity
Alloy and temper are chosen with your engineers from the first drawing, with circularity and sovereignty of supply in the brief.
Sustainability
We recover internal and customer scrap, melt it into qualified alloys and follow the metal from design to take-back. The circular grades are in service on flying, sailing and installed programmes. This page says what we measure, what a third party has verified, and what is still a target.

The loop
Alloy and temper are chosen with your engineers from the first drawing, with circularity and sovereignty of supply in the brief.
Internal and customer scrap is recovered and goes back into our furnaces, with controlled casting. More than 80 % of our raw metal comes from recycled sources, internal or external.
Extrusion, rolling, forging, drawing and heat treatment turn the metal into wires, strips and bars, then into near-net-shape parts. Local stock and open orders keep the supply short.
Your production scrap and end-of-life parts come back to us and go into melting. Our service centres recover customers' scrap, and copper alloys can be remelted again and again.
Measured, verified, targeted
| Indicator | 2024 | 2025 | Target | Assurance |
|---|---|---|---|---|
| Recycled metal in raw material purchases% of purchases | 71 % | 75 % | 85 % by 2030 | Not audited |
| Scope 1 + 2 emissions, location-basedtCO₂e | 9,350 | 9,045 | -50 % between 2018 and 2030 | Audited with limited assurance |
| Scope 3 emissionstCO₂e | To be supplied | To be supplied | -25 % between 2021 and 2030 | Audited with limited assurance |
| Energy consumption of own operationsMWh | 60,859 | 61,341 | To be supplied | Not audited |
| Water withdrawalthousand m³ | 208 | 238 | -60 % between 2022 and 2030 | Not audited |
| Waste diverted from disposal% of waste generated | 33 % | 37 % | To be supplied | Not audited |
| Lost-time injury rateper million hours worked | 20.2 | 15.7 | -40 % between 2022 and 2030 | Audited with limited assurance |
| Basis Source: CoP 2025 sustainability report, CSRD annex. 2025 is shown at constant scope, without the four companies acquired in 2025. Including them, scope 1 and 2 emissions reach 13,621 tCO₂e and the lost-time injury rate 24.0. | ||||
EcoVadis Gold 2026
85/100 in 2026, against 78/100 in 2025. The gold medal was renewed with a higher score.
See the certificate in Downloads TargetsSBTi-validated targets
Near-term climate targets validated by the Science Based Targets initiative. Ask us for their detail.
See the approval letter in DownloadsISO 14001 on five sites
Environmental management certified at Suippes, Breteuil, Rydzyna, AW Fraser and Lebronze Alloys UK.
Policies and commitments
Code of ethics and conduct
Rules of conduct for every employee, to control the legal, regulatory and ethical risks of our industry.
Read the code (PDF) PurchasingPartner code of conduct
Transparency and traceability on the origin and compliance of what we buy, conflict minerals included. It weighs in the choice of our suppliers.
Read the code (PDF) Quality and environmentQuality, safety and environment policy
Our commitment to preserve resources, reduce our environmental impact and promote the recycling of copper alloys.
Read the policy (PDF) Health and safetyTen golden rules
Ten rules for health and safety at work guide daily actions on every site, backed by training, communication and investment.
Read the rules (PDF)UN Global Compact
We support the UN principles on human rights, labour, the environment and anti-corruption. Our actions contribute to 11 of the 17 Sustainable Development Goals.
Gender equality index 81/100
Our French company scored 81/100 in 2025 on the EGAPRO gender equality index, above the expected level of 75.
Report and policies
Our CoP 2025 report details our targets, our actions and the CSRD indicators shown on this page. It is published in French.