Nickel-BaseBeryllium-freeIn production
Nickel 201
NiMnSiC · N02201
Nickel 201 is the low carbon counterpart of Nickel 200, a pure nickel strip referenced UNS N02201. Its low carbon content allows high temperature use without intergranular corrosion, in shunts, connectors and electronic components.
100–450 MPaYield strength
380–560 MPaTensile strength
2–40 %Elongation
18 %IACSEl. conductivity
Specify this grade
Qualification packs are released after a short form. Export control applies.
Properties
Guaranteed values, by temper.
- Alloy family
- Nickel-Base
- Chemistry family
- Ni
- Lead-free
- Yes
Forms
Forms & dimensions available
Strips5 variant(s)
Dimensional ranges and tolerances on request — machining and finishing are in house.
Standards
Standards & equivalences
- DIN 17740 W n°2.4068
Product and process qualifications are listed above. Customer approvals are confidential and are not disclosed.
Applications
Markets & applications
Applications
- Shunts and precision resistors
- Battery pack connectors
- Cathodes in hydrogen fuel cells
- Bursting discs
- Flux cored wires
Why this grade
Low in carbon, for high temperature use without intergranular corrosion
High purity nickel with corrosion resistance and electrical conductivity
Cast for metallurgical cleanliness, as thin strips and vacuum applications require
Suited to deep drawing, soldering and welding
Alternatives
If this grade is not the right trade-off.
GradeChemistryYield strengthChoose it when
Nickel 201You are hereNi450 MPaChoose it when the part sees high temperature in service and you need a pure nickel referenced UNS N02201, with a lower carbon limit than Nickel 200.
Nickel 200Ni500 MPaChoose it when the part needs standard pure nickel, UNS N02200, in hard or spring tempers. For high temperature service, take the low carbon Nickel 201.
Nickel 206Ni480 MPaChoose it when the drawing calls for DIN 17740 W n°2.4060, or when you want more nickel and lower resistivity than Nickel 200, in annealed or hard temper. Nickel 206C adds a lower carbon limit.
Nickel 206ANi150 MPaChoose it when you need low carbon pure nickel with tighter residual limits than Nickel 201. It is supplied annealed, with no DIN or UNS designation.
Nickel 206CNi480 MPaChoose it when the part needs the purity of Nickel 206 with a low carbon content, or the lowest resistivity of the range. Tempers run from annealed to full hard.
Niclal 400NiCuFeMn700 MPaChoose it when the part faces seawater or chloralkali corrosion, or needs more strength than the pure nickel grades, and high electrical conductivity is not required.
Niclal 400 BCNiCu
Niclal 404NiCuFeMn
Niclal 4QQNNiCu