Nickel-BaseBeryllium-freeIn production
Nickel 206
NiMnSiC
Nickel 206 is a pure nickel strip with more nickel and tighter copper and iron limits than Nickel 200. It serves shunts, battery pack connectors and electronic components specified to DIN 17740 W n°2.4060.
110–480 MPaYield strength
350–550 MPaTensile strength
0–40 %Elongation
20 %IACSEl. conductivity
Specify this grade
Qualification packs are released after a short form. Export control applies.
Properties
Guaranteed values, by temper.
- Alloy family
- Nickel-Base
- Chemistry family
- Ni
- Lead-free
- Yes
Forms
Forms & dimensions available
Strips2 variant(s)
Dimensional ranges and tolerances on request — machining and finishing are in house.
Standards
Standards & equivalences
- DIN 17740 W n°2.4060
Product and process qualifications are listed above. Customer approvals are confidential and are not disclosed.
Applications
Markets & applications
Applications
- Shunts and precision resistors
- Battery pack connectors
- Electronic components for telecommunications
- Cathodes in hydrogen fuel cells
- Sprinkler parts
Why this grade
Higher nickel content than Nickel 200 and 201, with tighter copper and iron limits
Lower electrical resistivity than Nickel 200 and 201
Suited to deep drawing, soldering and welding
Alternatives
If this grade is not the right trade-off.
GradeChemistryYield strengthChoose it when
Nickel 206You are hereNi480 MPaChoose it when the drawing calls for DIN 17740 W n°2.4060, or when you want more nickel and lower resistivity than Nickel 200, in annealed or hard temper. Nickel 206C adds a lower carbon limit.
Nickel 200Ni500 MPaChoose it when the part needs standard pure nickel, UNS N02200, in hard or spring tempers. For high temperature service, take the low carbon Nickel 201.
Nickel 201Ni450 MPaChoose it when the part sees high temperature in service and you need a pure nickel referenced UNS N02201, with a lower carbon limit than Nickel 200.
Nickel 206ANi150 MPaChoose it when you need low carbon pure nickel with tighter residual limits than Nickel 201. It is supplied annealed, with no DIN or UNS designation.
Nickel 206CNi480 MPaChoose it when the part needs the purity of Nickel 206 with a low carbon content, or the lowest resistivity of the range. Tempers run from annealed to full hard.
Niclal 400NiCuFeMn700 MPaChoose it when the part faces seawater or chloralkali corrosion, or needs more strength than the pure nickel grades, and high electrical conductivity is not required.
Niclal 400 BCNiCu
Niclal 404NiCuFeMn
Niclal 4QQNNiCu